Posts Tagged ‘Case study’

Case Studies: Point-to-point wireless bridge – Campus

Friday, December 6th, 2013

IMG_0095

Gyver Networks recently completed a point-to-point (PTP) bridge installation to provide wireless backhaul for a Boston college

Challenge:  The only connectivity to local network or Internet resources from this school’s otherwise modern athletic center was via a T1 line topping out at 1.5 Mbps bandwidth.  This was unacceptable not only to the faculty onsite attempting to connect to the school’s network, but to the attendees, faculty, and media outlets attempting to connect to the Internet during the high-profile events and press conferences routinely held inside.

Another vendor’s design for a 150 Mbps unlicensed wireless backhaul link failed during a VIP visit, necessitating a redesign by Gyver Networks.

http://www.gyvernetworks.com/TechBlog/wp-content/uploads/2013/12/IMG_0103.jpgResolution:  After performing a spectrum analysis of the surrounding environment, Gyver Networks determined that the wireless solution originally proposed to the school was not viable due to RF spectrum interference.

For a price point close to the unlicensed, failed design, Gyver Networks engineered a secure, 700 Mbps point-to-point wireless bridge in the licensed 80GHz band to link the main campus with the athletic center, providing adequate bandwidth for both local network and Internet connectivity at the remote site.  Faculty are now able to work without restriction, and event attendees can blog, post to social media, and upload photos and videos without constraint.